Till sidans innehåll

Offset Pedal Connector

  • Length (plug to plug): 10 mm
  • Allows for the shortest possible connection of two pedals
  • For pedals with side-mounted, offset sockets
  • Suitable for pedals with side panels at a 90° angle to the floor
  • 6.3 mm Mono jack socket on both sides
  • Tillgänglig sedan Februari 2017
  • Artikelnummer 404979
  • försäljningsenhet 1 Styck
  • Length 0 m
  • Colour Gold
  • Connector 1 Jack 6,3mm TS male
  • Connector 2 Jack 6,3mm TS male
  • to Connector 6,3mm TS Jack
45 kr
Alla priser inklusive moms
i lager
1

130 Kundbetyg

4.6 / 5

hantverkskvalitet

67 Recensioner

CV
Rockboard Z-Connector gold
Chris Vierge 02.07.2017
Perfekt för den som vill spara plats och har 2 pedaler som som ska sitta bredvid varandra och har in/utgångarna på sidorna, (tyvärr har ju inte alla pedaler det; skulle underlätta). "Z-formen" fungerar alldeles utmärkt när in/utgångarna inte sitter i jämnhöjd. Rekommenderas.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

C
Gör jobbet!
CrazyChester 17.03.2022
Snygg, sparar plats och gör jobbet!
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
P
Better of the Connectors
PJFord 28.12.2019
Most pedal boards have various different pedals and makes. Joining these together can save you a little space and mess but straight connectors might not work. If you have a few boss pedals in which inputs/outputs are right beside each other than of course the straight connector is a good idea.
The offset connector is great for everything else as it basically adjusts to the height and location of inputs while keeping the pedals close to each other. I use these more now connecting EHX to Boss and more.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
v
ultimate space saver
vedi 10.11.2022
I've bought a couple of these to connect pedals from different manufacturers (e.g. EBS and TC electronic), as the pedals can be different sizes and/or have their inputs/outputs in different places. obviously only works if pedal in/out is on its side ;)

well, for me it works perfectly, the pedals are positioned tightly together and in a straight row, i.e. none of the pedals is considerably higher/lower in the row of the pedalboard. might not work for all pedals out there, so do a little research about pedal dimensions and some the math before buying.

in my particular situation (wanting the pedals strictly straight in one row) I don't think I could have saved any more space between the pedals if they were connected with cables that have flat plugs - two of those plugs next to each other are probably thicker, or just about the same width s this connector, once plugged in.

nota bene, I bought a couple of straight connectors from the same brand, these work great to connect pedals from the same manufacturer.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension