Rockboard MOD 3 V2 TRS & XLR Patch Bay

Visa översättning

All-in-one patch-bay for pedalboards

Suitable for MOD Slots in RockBoard Pedalboards
Compatible with a wide range of other pedalboards
Acts as a central access point to the effect setup
Establishes clear cable routes to and from the pedalboard
Removable front panel for mounting on or under pedalboards
3x 6.3 mm TRS thru
2x XLR thru (male front / female rear)
1x XLR thru (female front / male back)
1x DC 2.1 x 5.5 mm hollow plug thru
1x AC IEC thru (male front / female rear)
All connections mirrored on the rear side
Dimensions with front panel (W x D x H): 175 x 85 x 47 mm
Dimensions without front panel (W x D x H): 160 x 85 x 33 mm
Weight: 450 g
Includes mounting screws, lock nuts and TX wrench

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

Notera Register your purchase at shop.warwick.de/en/warranty-registration for an extended warranty of 4 years.

30 dagar öppet köp

Tillgänglig sedan Augusti 2019
Artikelnummer 468599
försäljningsenhet 1 Styck

789 kr

Alla priser inklusive moms

Säljranking

i Tillbehör för Rockbag

Detta är vad kunder som tittade på denna produkt köpte

Rockboard MOD 1 V2 TRS & XLR Patchbay

677 kr

köpt

Rockboard Pedalboard Tape 100 cm

Harley Benton SpaceShip Hook & Loop Tape 3M

66 kr

42 Kundbetyg

5 30 Kunder 4 5 Kunder 3 3 Kunder 2 2 Kunder 1 2 Kunder

4.4 / 5

hantverkskvalitet

Poängpolicy

32 Recensioner

Visa översättning

Visa original

Tyvärr uppstod ett fel. försök igen senare.

Total disappointment

TsalerA 30.08.2021

This is the reason of my bad evening.
Bought it to use with Rockboard pedalboard + Rockboard PSU. Looks cool, but that's all.
1. You have to do an screw-thread in the native pedalboard fof this thing by youself! Guys at the factory were very busy)) DIY!!!
2. It's patch-bay for the XLRs! Guess what?) XLR plugs do not fit in to the pedalboard holes!
3. Connected this thing to the native RB PSU. And it's very very noisy! Spend an hour looking whats the problem. It's this thing!!! Unpluged PSU fron this thing. connected PSU bypassing this thing, and it become less noisey!

Summary: This thing is patch-bay for xlrs, jacks and power.
You can not use this with XLRs and Rockboard pedalbords. You Can not use this with Rockboard PSU. This thing is useless. Waste of money(

Anmäl recension

Uppfattar du det som att denna recension använder felaktiga fakta eller som stötande av någon anledning? Vänligen skriv en notis och gärna din e-postadress i textfältet.

Visa översättning

Visa original

Tyvärr uppstod ett fel. försök igen senare.

Inputs have noise, went back

Kikodasneves 04.10.2025

The jacks in this unit, when used as an input, add noise to the signal. If you search here or online, a bunch of people have written the same thing. Even a friend of mine that uses it says he faces noise in some venues while using these jack inputs. It went back, unfortunately.

Anmäl recension

Uppfattar du det som att denna recension använder felaktiga fakta eller som stötande av någon anledning? Vänligen skriv en notis och gärna din e-postadress i textfältet.

Visa översättning

Visa original

Tyvärr uppstod ett fel. försök igen senare.

Can't imagine using my Rockboard without it

AleksanderS 15.02.2025

Been using it in my Rockboard 4.2 for over 2 years now. I have a BOSS RC-600 looper on my board along with 11 other pedals, and it makes everything very convenient and tidy. No added noises to the system, no complaints about build quality. Bought an XLR reverser adapter cable so I can connect 2 mics to it, two of the 1/4" outputs are routed as L & R mono outputs from RC-600, and the third jack output is for Stereo Headphone Out, very convenient. 3x 1/4" TRS outputs can be turned into 6x mono in-outs using Y-splitter cables, which is great versatility. The added 9V output great for powering any extra pedals that are not permanently on my board that I might be using or trying out. It saves a lot of time and mess - no fiddling about with cabling, going under the board to connect or route something - just plug what you need in the MOD 3 patch-bay, connect the power cable, and everything works.

Anmäl recension

Uppfattar du det som att denna recension använder felaktiga fakta eller som stötande av någon anledning? Vänligen skriv en notis och gärna din e-postadress i textfältet.

Visa översättning

Visa original

Tyvärr uppstod ett fel. försök igen senare.

I love it!

Love Rockboard 02.06.2021

Makes my board a lot neater and it looks cool too! Perfect for singer/guitarists (like me) or anyone that needs a few xlr ports on top of the normal jacks.

Anmäl recension

Uppfattar du det som att denna recension använder felaktiga fakta eller som stötande av någon anledning? Vänligen skriv en notis och gärna din e-postadress i textfältet.

Läs alla recensioner

Rockboard MOD 3 V2 TRS & XLR Patch Bay

All-in-one patch-bay for pedalboards

Detta är vad kunder som tittade på denna produkt köpte

42 Kundbetyg

Du måste vara inloggad för att kunna betygsätta en produkt.

32 Recensioner

Smart Navigator

Serveras med kärlek!

Rockboard MOD 3 V2 TRS & XLR Patch Bay

All-in-one patch-bay for pedalboards

Detta är vad kunder som tittade på denna produkt köpte

Tillbehör & matchande produkter

42 Kundbetyg

Du måste vara inloggad för att kunna betygsätta en produkt.

32 Recensioner

Jämför alternativ

Smart Navigator