Till sidans innehåll

Rockboard MOD 2 V2 Midi & USB Patchbay

4.6 av 5 stjärnor från 43 kundbetyg

MIDI and USB patch-bay

  • All-in-one patch-bay for pedalboards
  • Suitable for MOD slots in RockBoard pedalboards
  • Compatible with a wide range of other pedal boards
  • Acts as a central access point to the effect setup
  • Establishes clear cable routes to and from the pedal board
  • Removable front panel for mounting on or under pedal boards
  • 4x 6.3 mm TRS thru
  • 2x 5-Pin DIN MIDI thru
  • 1x USB Type A thru
  • 1x DC 2.1 x 5.5 mm hollow plug thru
  • 1x AC IEC thru (male front / female rear)
  • All connections mirrored on the rear side
  • Dimensions with front panel (W x D x H): 175 x 85 x 47 mm
  • Dimensions without front panel (W x D x H): 160 x 85 x 33 mm
  • Weight: 420 g
  • Includes mounting screws, lock nuts and TX wrench

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

Notera Register your purchase at shop.warwick.de/en/warranty-registration for an extended warranty of 4 years.
  • Tillgänglig sedan Augusti 2019
  • Artikelnummer 468507
  • försäljningsenhet 1 Styck
738 kr
Alla priser inklusive moms
i lager
1

43 Kundbetyg

4.6 / 5

hantverkskvalitet

29 Recensioner

B
Rock solid
BWesslan 14.02.2024
Exactly what I needed. I don't like drawing and pulling cables out of pedals all the time,
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
JK
Excellent for keeping your pedalboard's I/O organized
Jussi K. 28.01.2023
Great for keeping things tidy and organized if you use 4-cable method and require midi-connectivity. I have the Rockboard Quad 4.2 B and this fits right in. I also managed to fit the Truetone 1 Spot Pro CS12 pedal power under the board after some tetris.

A word of warning: Rockboard's angled "flat" midi cables are not a good fit for this patchbay! They are oriented so that the cable will block other inputs. I bought those first but had to change to straight midi cables instead.
hantverkskvalitet
4
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
M
Works as it should
MetalJonesy 30.03.2020
Very tidy little device to clear up the clutter on your Rockboard. I recently bought a RockBoard after many years using my own custom made board. I wanted to streamline my effects and moved to an HX stomp in replacement of my drives, delay, reverb, eq, phaser and compressor.

I have been using a 4 cable method for years in the analog domain with a Joyo PXL Pro switcher so already built my own patch box to get rid of cables going everywhere. I could have carried on using it, but the added feature of the IEC through means I can now mount both PSU's and MXR brick under the board with use of an IEC split out Y cable and some IEC to plug socket. It also integrates seamlessly and just makes the whole set up look really professional!
hantverkskvalitet
2
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
M
Awesome patchbay
MD2 28.09.2020
It simplified my pedalboard connections. Looks professional and way better than other patchabays I've looked into.
hantverkskvalitet
1
0
Anmäl recension

Anmäl recension