Till sidans innehåll

Active DI Box

  • Connectors: Jack in/thru, XLR out
  • Merge function
  • - 15 dB pad
  • Low cut
  • Phase reverse
  • Ground/Lift
  • Operates with 48V phantom power
  • Tillgänglig sedan Oktober 2006
  • Artikelnummer 199359
  • försäljningsenhet 1 Styck
  • Multi-Channel Unit No
  • Channels 1
  • Active / Passive Active
  • 19" No
  • Pad switchable Yes
  • Gnd/Lift switchable Yes
  • Powered by battery No
  • Speaker Simulation No
2 999 kr
Alla priser inklusive moms
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
1

141 Kundbetyg

4.9 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

funktioner

ljud

hantverkskvalitet

80 Recensioner

A
Radial Engineering J48
Anonym 19.04.2015
Mycket bra DI burk, jag har använt den till både bas och akustisk Gitarr som jag har pluggat direkt in i PA. Det finns möjlighet att göra en DI tappning till ex Porta som jag även använt. Jag köpte en separat fantom matning som jag använder. Den är byggd som en tank så den är jättestabil.
funktioner
ljud
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

L
Radial Engineering J 48
Lilling 27.08.2013
Radial Engineering J 48 är en linebox som andas kvalité. Så fort man tar i den känner man att byggkvaliteten är på topp och ljudmässigt är det en top of the line box. Enda nackdelen är väl att man måste trycka på en knapp för att se om fantommatningen är på.
funktioner
ljud
hantverkskvalitet
1
1
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
K
good, but coloured
Kar0l 30.03.2018
I?ve been looking for a new DI for tracking bass and guitar. After some hefty research, I narrowed my options down to the following:

- BSS AR133 (EUR 105,-)
- Radial J48 EUR (235,-)
- Neve RNDI (EUR 299,-)


I plugged my Ibanez SR650 into each of these DI?s, into my Focusrite 44. I tracked some parts in both active and passive setting. My findings:

BSS AR133: It doesn?t look very slick. With its huge rubber sides, it does look indestructable. The sound is clear and transparent, with very low noise.

Radial J48: It looks good, and also definitely feels sturdy enough. The sound is noticably warmer than the BSS, more analogue sounding. It sounds great, but definitely coloured.

Neve RNDI: Looks wise, this is clearly the winner of the three. Like the BSS, it sounds very clear, even, and moderate in the lows.

The BSS and the Neve sound the most natural and clear, which is what I am looking for in a DI. I want the cleanest sound possible to feed to a pre-amp. However, the sound difference between these two is very small to my ears. So small, that it doesn?t warrant the price difference.

Hence, my choice is the BSS AR133. It sounds great, is super sturdy, and very affordable. Recommended!
funktioner
ljud
hantverkskvalitet
16
2
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
R
Simple and easy review of 6 DI's
RL-NL 06.05.2025
Passive:
Radial Pro DI
Radial JDI
Telefunken TDP-1

Active:
Rupert Neve DI / RNDI (normal version, not the mini)
Radial J48
Telefunken TDA-1


Passive vs Active DI's:
Active DI's have a more defined sound image overall.
The level difference between the active and passive DI's is huge, 40-50% level difference! It is wise to use an active DI so the sound engineer does not have to boost your signal. Boosting = more noise, having to lowering signal / gain does not give issues.

Radial ProDI vs JDI:
JDI has more definition in low / low-mid + a bit more highs.

Telefunken's vs the rest:
The Telefunken's have a big high cut, it sound like high cut at 1000hz. (a guess, I did not measure)
They have more Low-mids then the RNDI and similair Low-mids to the Radials, but way less highs.

Rupert Neve DI and Telefunken's:
They both have (J)FET transistors inside, that gives them tube like compression. When you use a separate compressor with the RNDI or Telefunken's, especially a J(FET) compressor (1176 style), then your definition might get lost. (I experienced this myself)
If you want full control over your compression and saturation with a separate device/pedal, then the Radials are a better choice.

Rupert Neve DI vs J48:
The J48 has more definition in Low-Mids and highs.

My advice for live use:
Skip the passive DI's and the Telefunken's.
For bass-guitar use the Radial J48. For keys, acoustic and electric guitars use the Rupert Neve DI (beware angled plugs do not fit well with the 'normal RNDI', buy the M-version if you want to use angled plugs)
funktioner
ljud
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension