Till sidans innehåll

Harley Benton Parts Potentiometer A500KOhm

4.5 av 5 stjärnor från 340 kundbetyg

Potentiometer

  • Resistance 500 kOhm A-log
  • Small housing
  • Normal toothed axis
  • For assembling on wood
  • Logarithmic
  • Tillgänglig sedan Januari 2003
  • Artikelnummer 159774
  • försäljningsenhet 1 Styck
  • Design Mini Pot
  • Resistance Value 500 kOhms
  • Characteristic Curve Logarithmic
  • Thread Length in mm 7,0 mm
  • Tandem Poti No
  • Push/Push No
  • Solderless No
  • shaft type grooved
16,70 kr
Alla priser inklusive moms
Mängdrabatt
Pris per styck Du sparar Summa
16,70 kr 1
15,39 kr 7,8% 4
14,09 kr 15,6% 8
12,89 kr 22,8% 20
i lager
1

340 Kundbetyg

4.5 / 5

hantverkskvalitet

120 Recensioner

EH
Harley Benton Parts Potentiometer A500KOhm
Eric H 03.11.2019
Jag använde den här poten när jag byggde om en Telecaster och det är en tyst och fin komponent. Jag var väldigt noga med att jorda alla höljen och skärmningar och den här fungerar fortfarande felfritt två år senare. Mycket prisvärd.
hantverkskvalitet
1
0
Anmäl recension

Anmäl recension

A
Meh
Arad 29.05.2020
The taper of how it turns the audio signal down is quite weird and sudden.
For example, instead of going from 100% to 0% by going through everything in between, it will go from 100% to 80% and then jump to 30% and stay there for a while before 0. If you are building or fixing a good guitar, go with the Fender pots instead.
hantverkskvalitet
1
0
Anmäl recension

Anmäl recension

H
Jämn volymökning!
Haikieboy 31.08.2025
Använder dessa både i gitarrer men även i några hemmabyggen och det bästa med dem är att dem INTE går ifrån 0-10 på en gång, utan man kan verkligen ställa ljudet med potten utan problem!
Bra motstånd och håller det den skall göra utan att kompromissa någonstans och väl värd sitt pris!
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
MM
Good mini-pot, small and short shaft, but works well.
Music Maven 08.07.2019
This is a good quality mini-pot. I purchased this as a replacement for a Harley Benton guitar; it's NOT the same that was in the guitar despite being a Harley Benton product! This is a very small pot! However, as the base is smaller, it's easier to solder as it get's hot more quickly! The full-size units need a more powerful soldering iron. It turns smoothly and functions well. Important: The neck of the shaft is quite short, and it *just* poked through the guitar's top, with enough thread to just get the nut on. If you've got a guitar with a carved or thick top, you'll need a longer shaft for sure. For scratch-plate mounting it should be fine. TIP: You should only ever use "A" log pots for volume & tone, unless you've a vintage "B" linear pot to replace. They just don't work as well. "C" pots are for left-handed players.
hantverkskvalitet
4
2
Anmäl recension

Anmäl recension