Mojotone CTS 500K Std. Split P/P VT Pot

()

Starta 360°

Visa översättning

Potentiometer for Guitar and Bass

Integrated push/pull switch
Resistance curve: Logarithmic
Manufactured in accordance with the high quality requirements as set out by CTS
The "Vintage Taper" resistance curve of these potentiometers is between that of a standard logarithmic and that of a linear pot, enabling a more natural control response
Resistance: 500 kOhm
Finely grooved split shaft (24 splines for US guitars and pot buttons)
Shaft diameter: 6 mm
Thread length: 9.5 mm
Thread diameter: 9.5 mm
Housing diameter: 23.8 mm
Includes a washer, a tooth lock washer, and a nut

Tillgänglig sedan November 2020
Artikelnummer 494193
försäljningsenhet 1 Styck
Design Push Pull/Push Push
Resistance Value 500 kOhms
Characteristic Curve Vintage Taper
Thread Length in mm 9,5 mm
Tandem Poti No
Push/Push Push/Pull
Solderless No
shaft type grooved

153 kr

Alla priser inklusive moms

Säljranking

i Potentiometer

Detta är vad kunder som tittade på denna produkt köpte

TAD CTS 500K Std. Spl. P/P VAT Pot

133 kr

11%

köpt

Allparts CTS 500K Audio Taper Pot

109 kr

köpt

Mojotone CTS 500K Std. Split VT Pot

120 kr

köpt

Allparts Push/Push Poti 500K

209 kr

50 Kundbetyg

5 42 Kunder 4 6 Kunder 3 1 Kund 2 1 Kund 1 0 Kunder

4.8 / 5

hantverkskvalitet

Poängpolicy

34 Recensioner

Works great!

Andreas232 19.01.2023

Great sound and useful wiper, using it for volume and works great.
Also really durable,

Anmäl recension

Uppfattar du det som att denna recension använder felaktiga fakta eller som stötande av någon anledning? Vänligen skriv en notis och gärna din e-postadress i textfältet.

Visa översättning

Visa original

Tyvärr uppstod ett fel. försök igen senare.

Excellent as a tone pot, tight fit!

Newbie Guitar Player 09.06.2022

I bought this as part of a pickup swap / rewiring job on my Squier Mustang HH. I installed it as a tone pot and wired the push-pull switch for splitting the bridge humbucker (neck position is a P90). The PCB makes it really easy to wire the P/P. There was also some space between the PCB and the pot itself to tuck in my capacitor and retain the original profile. Do beware that it is a full-sized pot and quite bulky, more so because of the P/P. Be careful and measure your guitar cavity before buying. The Mustang control cavity was a realy tight fit and I had to modify the part a bit by bending the two prongs at the top. I also routed the cables around the pot as there was no space behind/underneath it. The control plate on the Mustang is relatively thin sheet metal and the pot sticks up a bit above the surface, but that doesn't really bother me. Luckily I had no issues with the thread diameter and it dropped right into the control plate opening - no wobble, no need to enlarge the opening. For the knob I used a metal screwable one that has a smooth inside surface and is made for 6mm shaft. If you want to get a knurled knob or re-use your old knob, check your measurements and make sure it has the correct number of splines for the US standard.

Overall I am really satisfied with my purchase, even though I had some minor issues with the fitment. The pot functions well and I am happy with the tone responce I get from the vintage taper in conjunction with a 47nF capacitor. It rotates smoothly and doesn't scratch. Push-pull works as expected. As with any guitar mod, my advice is to measure carefully and be prepared to adjust some things if necessary.

Anmäl recension

Uppfattar du det som att denna recension använder felaktiga fakta eller som stötande av någon anledning? Vänligen skriv en notis och gärna din e-postadress i textfältet.

Visa översättning

Visa original

Tyvärr uppstod ett fel. försök igen senare.

Nice pot

StephanPK 27.01.2022

Big, easy to solder, but could not fit if you have small guitar cavity, so check it before you buy it

Anmäl recension

Uppfattar du det som att denna recension använder felaktiga fakta eller som stötande av någon anledning? Vänligen skriv en notis och gärna din e-postadress i textfältet.

Visa översättning

Visa original

Tyvärr uppstod ett fel. försök igen senare.

High quality

Burak Oncel 16.09.2022

This cts pots are in good quality, I like them. But they are very big. You need to know is your guitar cavity big enough for cts pots if you want to buy this product.

Anmäl recension

Uppfattar du det som att denna recension använder felaktiga fakta eller som stötande av någon anledning? Vänligen skriv en notis och gärna din e-postadress i textfältet.

Läs alla recensioner

Mojotone CTS 500K Std. Split P/P VT Pot

Potentiometer for Guitar and Bass

Detta är vad kunder som tittade på denna produkt köpte

50 Kundbetyg

Du måste vara inloggad för att kunna betygsätta en produkt.

34 Recensioner

Smart Navigator

Serveras med kärlek!

Mojotone CTS 500K Std. Split P/P VT Pot

Potentiometer for Guitar and Bass

Detta är vad kunder som tittade på denna produkt köpte

Tillbehör & matchande produkter

50 Kundbetyg

Du måste vara inloggad för att kunna betygsätta en produkt.

34 Recensioner

Jämför alternativ

Smart Navigator