Till sidans innehåll

Allparts Audio Taper 500k Push/Pull Pot

4.6 av 5 stjärnor från 155 kundbetyg

Audio Taper Push/Pull Potentiometer

  • Logarithmic 500 kΩ potentiometer
  • Push/Pull switching function
  • Knurled shaft with standard length
  • Thread height: 9 mm
  • Thread diameter: 9.4 mm
  • Tillgänglig sedan Juni 2016
  • Artikelnummer 388509
  • försäljningsenhet 1 Styck
  • Design Audio Taper
  • Resistance Value 500 kOhms
  • Characteristic Curve Logarithmic
  • Thread Length in mm 10,0 mm
  • Tandem Poti No
  • Push/Push Push/Pull
  • Solderless No
  • shaft type grooved
121 kr
Alla priser inklusive moms
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
1

155 Kundbetyg

4.6 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

hantverkskvalitet

78 Recensioner

S
Not recommended
Stratamannen 25.07.2021
Not what I expected. A flimsy feel and a noticeable pop sound when you use it. I had to change for a more expensive CTS that has a solid feel and is dead quiet in use.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
B
Good push pull pot
Belgian 17.09.2018
I used this pot to replace the old volume pot in my Mexican blacktop telecaster

Pros:
fairly easy to solder
the grounding lip on the bottom makes wiring a breeze
satisfying operation of the push pull switch
Cons:
didn't fit my telecaster control plate, but drilling out the holes bigger solved that easily and the washer disguises that perfectly

I Would consider buying this again if I need another p/p pot
hantverkskvalitet
2
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
M
Mateii 31.08.2020
They do the job, and they come with double nuts for height adjustment. They soldered relatively easily and I used them to wire a HSH pickguard with P-Rails for a ST guitar.

I three of them in order to achieve the Rail/P90/Humbucker series/ Humbucker parallel, and neck tap sounds. Very versatile.

They started being a bit scratchy after 2 years
hantverkskvalitet
3
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
WF
Potentiometer
Wow Factor 03.06.2022
It is a good quality potentiometer that i don't have any problems with. One thing to consider if buying one is that it is slightly larger than a normal potentiometer.
hantverkskvalitet
1
0
Anmäl recension

Anmäl recension