Harley Benton CST-24HB TOL Tobacco Flame

Jag köpte denna då jag ville ha ett nytt ”projekt” efter att jag byggt klart en partscaster. Vi kan börja med det negativa för den går snabbast, stallet är av en rätt mjuk metall då skruvarna som hör fast det gick sönder när jag skulle skruva på dem, inget farligt men skruvarna blev lite vassa. Sen är stämskruvarna sådär. Nu det positiva, rostfria stål banden va som att spela på smält smör och mickarna är bättre en vad jag förväntade mig, speciellt hals micken som är tjock men mjuk och len i ljudet, precis som jag ville ha. Stallmicken är relativt okej men lite gles i ljudet. Överlag en extremt bra gitarr som är jävligt vacker och skön att spela.

Judging by my 3/2020 purchase, this is a great value, and a beautifully built instrument. Of the 4–5 semihollow guitars I've owned, this is the only one I've really loved, and wanted to play all the time.

Like the U.S.-made guitar that inspired it, it has nice acoustic chime, especially on chords, but also enough sustain on single-note lines to satisfy a solidbody player like me. Just don't expect this comfortable, compact body to sound as deep as a larger, more cumbersome ES-335–style guitar.

A few details I couldn't verify from other reviews: The top is nicely arched (not beveled), with arched fingers extending to the horns. The flame-maple veneer on my copy is almost bookmatched. The mahogany back also has some nice figuring under the deep stain, also almost bookmatched.

It looks like a 2-piece back, and I assume that both the back and the maple top are solid/carved wood. From another review, I learned that the center block and the mahogany rims are separate pieces of wood. So this is assembled like a 335, but (presumably) from solid wood pieces.

The neck is 3 pieces of mahogany, joined lengthwise, and stamped "Made in Vietnam." Given those details, and the improved quality control this copy suggests, I'm guessing that Thomann is now building them in the same Vietnamese factory that ESP uses for its LTD range. (I've played 5–6 EC-256's, including the one I own, and the build quality has been beautifully consistent across all of them.)

Unlike some reviews I've seen of earlier builds, the tree-of-life inlays on my copy are perfectly cut. They offer just stunning decoration and workmanship, especially this price. The only downside is that the jatoba fretboard is inherently duller in color than rosewood, so the inlays have less contrast here than they would have against rosewood. (Rosewood is finally exempted from CITES export restrictions, so maybe Thomann will switch to rosewood some day?)

The splittable Roswell LAF pickups are very high-quality for this price range. They're voiced for Les Pauls – so candidly, they don't sound as optimal on this semihollow as on my Harley Benton SC-450Plus (where they really shine). But they sound good enough that most purchasers will have no reason to replace them. The single-coil tones are surprisingly robust and viable, with a bit of gain. As with my SC-450Plus, this guitar's setup was perfect right out of the box.

The only problem with my copy was that the D string arrived buzzing like a sitar, along its entire length. Even the open string buzzed – which implied an incompletely cut slot at the wraparound bridge. Which is odd, because Thomann presumably inspected my B-Stock (returned) guitar before reselling it to me, yet somehow missed this.

Thomann says they've shipped me a replacement bridge, which is taking forever to arrive in the U.S. (As an alternative, they also offered to reimburse me for a repair by my luthier.) In the meantime, I've basically removed the buzz by deepening the bridge slot with a nail file.

A couple of final tips: The bridge's fixed intonation sounds fine, but you can buy a fully adjustable 6-saddle wraparound bridge at quite low cost. (The stock bridge appears to be a Wilkinson, and you can find Wilkinson as well as no-name options.) Also, if you buy a B-Stock copy, you're getting an extra level of inspection in Germany. They obviously missed my bridge's problem, but I'm confident Thomann wouldn't resell an instrument with serious cosmetic flaws (which have been a QC problem on past Harley Bentons shipped from China). Enjoy this axe!

When I received the guitar from the post office, the box was was nearly folded in half. Taco'd. My heart sank. I was sure everything inside was damaged. That fear was relieved when I cut through the many layers of post office tape and got into the box. The cardboard guitar box was setting on top of the Gator hard-case and had an extra layer of paper stuffing which protected the guitar from the extreme damage on the outside. Whew! Close call! Not sure why they didn't place the guitar inside the guitar case for shipping... maybe if you order you can request it. But anyway, back to the guitar.

The first thing you notice is the tree inlay. It is beautiful. I read some reviews on earlier models which said that theirs was not very good quality up close. Well, the one I got is almost flawless. I think they are only available on the Tobacco flame model, hopefully they can expand to other models and colors because they are amazing. The inlays are completely flat against the fretboard and look great. You would have to use a magnifying glass to find any flaws, and then, you would have to be very picky. The tag on the back of the headstock indicates that mine was made in Indonesia (if that matters) I bet it would be hard to find a fretboard with this style and quality for less than the price of this entire guitar! The neck feels very comfortable, and the jumbo frets give everything a solid and precise feel. The fit and finish of the body is great. Again, very pretty. You can see a few wires through the bottom 'f' hole, but again, I am not too concerned with that - just stick a finger in there and push them out of the way.

The sound you get from the CST is great. Action very low. Lower than my tele, which just had a pro set up. Easy The bridge is kind of weird. Only 2 strings are intonate-able. Strings stay in tune. Again. I haven't done anything to set up this guitar, and probably won't need to. We'll see how it handles the climate change after a few months, but the build quality is so high, I don't expect anything drastic.

The short and long of it is: Want a semi-hollow body PRS-style guitar? Have about $250 to spare? Get one! (or 2!)

... just buy it!

Another absolute HB classic.

It was the best packaged Harley I've received (presumably because it's pricier than my others?). The box had polystyrene lining the inside of the entire box - all four sides, bottom and top pieces - not just the usual corners and neck bit. The guitar was wrapped in the white, polystyrene-like fabric and that was then wrapped in a clear, plastic bag. A bit like triple-cooked chips and we all know how great they are.

Fit and finish was totally flawless. The Tree of Life neck inlays were perfectly, err, inlaid. No gaps or glue or misalignment which some older reviews have mentioned. The body binding was perfect. It has the standard issue "perfecto necko" (I'm trademarking that) for which Harleys are becoming known.

For the first 15 minutes of playing, I was a bit uncertain of the neck as it's a 350mm and most of my others are 305mm. Thirty minutes later and I'd decided you'd have to prise it from my cold, dead hands before I was letting this go.

The DC-DLX Tesla pickups are really great but these seem equally good but have a much more vintage character which suits the vibe. I think the coil split is more effective on these in terms of changing the character rather than just thinning out the sound. They also don't seem to drop the volume as much as the DC. The range of the tone knob seemed wider on these pickups as well.

I'd never experienced this body shape before and they never looked like a particularly comfortable guitar to me but with the hollow body reducing the weight and the curvy shape, it's VERY comfortable. I thought it had a belly cut but when I checked, it was nowhere to be found, making the comfort factor even more amazing. It seems a little bit slimmer than most so maybe that's what makes you feel so at home.

Regrets? I've had a few but then again ... anyway, personally I would have preferred the fretboard to be a bit darker but only to show off the Tree of Life inlay better. I'd also have liked the neck to have had cream binding to match the body. I'd prefer the coil split to be on both knobs so you could independently split the neck or bridge but this is rarely done and my DC-DLX Gotoh is the same. Anything else? Um, it didn't come with a guitar cable as has started happening (and strangely on the more expensive models). The Allen keys were in a clear bag whereas some of their guitars now come with a little black plastic pouch. As you can see, I'm struggling and I really had to push myself to mention these.

Yes, it's on the more expensive side for HB. It's twice the price of my TE62CC SFG. I love my TE62 so is it really worth the extra? Ab-so-lutely.

This review took longer than it should as I wanted to check something mid-way and couldn't put it down. Like I said at the beginning - just buy it already!