Till sidans innehåll

Power Supply Unit for Effect Pedals

  • Power supply with 5 outputs for 1-inch (25.4 mm)
  • Ultra-low noise due to multi-stage filtering
  • 5 Isolated DC outputs, 6 watts each
  • 660 mA at 9 V on each output
  • Maximum total power: 30 watts
  • Mounting hardware for Pedaltrain and Templeaudio boards included
  • Compatible with CIOKS GRIP v2.0 for drill-free mounting under Pedaltrain boards
  • 9 Flex cables included
  • 5 Years worldwide warranty
  • Weight: 410 g
  • Dimensions: 130 x 88 x 25.4 mm (5.2 x 3.5 x 1.0")
  • Incl. manual
  • Developed in Denmark, assembled in Poland
  • Tillgänglig sedan September 2022
  • Artikelnummer 546204
  • försäljningsenhet 1 Styck
  • DC/AC DC
  • Output current in mA 660 mA
  • 9 V Yes
  • 12 V Yes
  • 18 V Yes
  • Secondary voltage No
  • Multi-output power supply Yes
1 899 kr
Alla priser inklusive moms
i lager
1

176 Kundbetyg

4.9 / 5

hantverkskvalitet

114 Recensioner

A
Great power supply!
Andreas232 25.12.2022
Its really stable and easy to install, small size and fits under the pedaltrain nano+ with two screws. More power and smaller than the Cioks Adam Link, which ive used for years and never had any problem with., hoping the SOL will be just as reliable!
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

DZ
Gör precis vad den ska!
Daniël Z 28.05.2025
En mycket bra strömförsörjning för mitt pedalbord. Inget brummande. Värd sitt pris!
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

R
Great unit!
Robin3993 04.11.2026
Robust quality, noisefree, but I sent it back because I thought it was overkill for 1 pedal.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
K
Probably the best way to power Line 6 HX FX
Kikodasneves 06.09.2025
The best PS to power Line 6 HX FX (you also need the adapters Cioks 8800 Parallel Adapter Flex and Cioks 3050 Flex Typ 3). The Line 6 HX FX is very power hungry and can draw up to 1.1A under heavy DSP usage. Most PSs have a max. of 500mA outputs, so there's the risk that using a current doubler isn't enough. In this case, the outputs are 660mA, so you're safe.

P.S. The HX Stomp draws is a bit less power hungry, drawing up to 900mA, so you're probably safe if you use a doubler on another PS's regular 500mA outputs.
hantverkskvalitet
2
0
Anmäl recension

Anmäl recension