Till sidans innehåll

Thon Multiflex 1U Modulrack 45 S

4.7 av 5 stjärnor från 10 kundbetyg

19" Module Rack

  • Usable height: 1 U
  • Usable depth: 45 cm
  • Made of 15 mm multiplex, dowelled and glued
  • Finish: hard-wearing black lacquer
  • Cable feed at the back
  • Flat rubber feet on the bottom
  • Stackable thanks to milled recesses for rubber feet on the top
  • Suitable for Multiflex road case (Art. no. 168189)
  • 2 x Milled grip recesses on the side
  • Continuous rack rail on the front (optionally available on the back)
  • Exterior dimensions (W x D x H): 532 x 580 x 87 mm
  • Weight: 5.5 kg
  • Colour: Black
  • Includes a set of screws
  • Made in Germany
  • Tillgänglig sedan December 2018
  • Artikelnummer 454706
  • försäljningsenhet 1 Styck
  • Formfactor 19"
  • Construction Type Modulrack
  • Vertical Height Units 1 U
  • Internal Depht [mm] 450 mm
  • Horizontal Height Units 0 U
  • with display stand No
  • Rack rail at the back No
  • Service flap No
  • With Wheels No
  • Trolley No
  • Shock Mount No
  • Clasps No
  • Material 15 mm Plywood
  • Colour Black
  • Height (units) 1 U
  • External Width 535 mm
  • External Height [mm] 60 mm
  • External Depht [mm] 580 mm
  • Weight 5,5 kg
1 590 kr
Alla priser inklusive moms
i lager
1

10 Kundbetyg

4.7 / 5

stabilitet

funktion

hantverkskvalitet

7 Recensioner

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
g
Perfect top + side ventilation and access for UAD Apollo X rackmount interfaces
gk5000music 24.01.2022
Well built, well designed and sleek = 100% rating from me.

This rack is perfect as it provides side panel ventilation, a top panel ventilation airgap and rear cutaway access / ventilation while still allowing other studio products (monitors / rack gear) to stack on top - including more Thon Multiflex Rack enclosures.

UAD Apollo x6, x8, x8, x8p and x16 rack interfaces are vented on the top and should not be stacked on top of one another without a sufficient air-gap according to Universal Audio, despite some of their marketing photos to the contrary.

Apollo X Hardware Manual (p.31)
"Apollo X may get hot during normal operation if it doesn’t receive adequate airflow circulation around its chassis vents. For optimum results when mounting Apollo X in a rack, leaving at least one empty rack space above the unit to allow adequate airflow for cooling is strongly recommended."
stabilitet
funktion
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate de
Tyvärr uppstod ett fel. försök igen senare.
l
1A Verarbeitung, Realitätsnah durchdacht!
lzwicker 07.02.2021
Ich besitze mittlerweile mehrere Modulracks dieses Typs. Sie erweisen sich durch die Aussparung im oberen Teil als äußerst zweckmäßig, da man auch bei kurzen Geräten (z.B. Switchen oder analogem Siderack-Gerät) immer noch sinnvoll an die Anschlüsse kommt, ohne sich dabei die Hand verbiegen zu müssen.
Das ganze ist gepaart mit hervorragender Verarbeitung.
Dieses Produkt wird bei Bedarf jederzeit wieder von mir gewählt werden - es erfüllt 100% die Erwartungen.
stabilitet
funktion
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate de
Tyvärr uppstod ett fel. försök igen senare.
S
War leider ein Fehlgriff
StevieK 10.02.2022
Für die Bühne gedacht und nicht innerhalb von kleinen, geschlossen Räumlichkeiten. Meine Multiracks entwickelten irgendwelche Ausdünstungen, die nach irgendwelcher Holzbehandlung oder Farbe rochen. Sollte man sich nicht allzulange aussetzen, oder immer kräftig lüften. Stehen jetzt ungenutzt im Keller.
stabilitet
funktion
hantverkskvalitet
1
3
Anmäl recension

Anmäl recension