Med våra cookies vill vi erbjuda dig den bästa möjliga shoppingupplevelsen med allt som hör till. Detta inkluderar till exempel lämpliga erbjudanden, personliga annonser och att komma ihåg preferenser. Om detta är okej för dig, godkänn helt enkelt användningen av cookies för preferenser, statistik och marknadsföring genom att klicka på "Okej!" (visa alla). Du kan när som helst återkalla ditt samtycke via cookieinställningarna (här).
With grating lasers, UV spotlights, stobe arrays and RGBWA beam spotlights
Compact design
Individually controllable beams, black light, laser and strobe
Auto, music, master/slave and DMX mode
10 integrated show programmes in auto and music mode
Addressing and settings via control unit with 4-digit LED display
In DMX mode, 2, 5, 8 or 10 DMX channels can be selected
Includes infrared remote control (CR2025 button cell battery not included)
Swivel mounting bracket
Technical specifications:
Power supply: 100-240 V AC, 50/60 Hz
Power consumption: 35 W
Laser modules: Red 100 mW, green 30 mW
Wavelength: red 650 nm, green 532 nm
Laser class: 2M
Black light effect: 2 x UV with 3 W each
Strobe effect: 36x white with 0.5 W each
DMX channels: 2/5/8/10
DMX connection: XLR 3-pin
Sound control via in-built microphone
Protection rating: IP20
Dimensions: (L x W x H): 760 x 180 x 245 mm
Weight: 5.2 kg
Important note: This laser only works with a safety switch (e.g. emergency stop switch Art.#604019). The included interlock plug is in an unbridged state and does not close the contact required to operate the laser.
Legally, we advise against setting the interlock plug into the bridged state yourself and instead using an emergency stop switch.
Further information can be found in DIN EN 60825-1:2015.
