Till sidans innehåll

One Control Tri Loop - True Bypass Looper

5.0 av 5 stjärnor från 5 kundbetyg

Selector or momentary footswitch for effect pedals

  • 4 Selectable modes for different applications: Red, Bright White, Blue, Green
  • Footswitches provide control over two independent send/return loops
  • Momentary circuit can be used as Normally Closed (NC) or Normally Open (NO)
  • Switchable buffer
  • 2 Footswitches: L and R
  • Status LEDs
  • Metal housing
  • True bypass
  • 1x Input: 6.3 mm mono jack
  • 1x Output: 6.3 mm mono jack
  • 1x Send: 6.3 mm mono jack
  • 2x Return: 6.3 mm mono jack
  • 1x TRS send: 6.3 mm stereo jack
  • Power supply connection: Barrel connector 5.5 x 2.1 mm (negative polarity inside)
  • Power supply via 9V DC mains adapter (not included in delivery)
  • Power consumption: max. 100 mA
  • Dimensions (L x W x H): 65 x 120 x 50 mm
  • Weight: 250 g

Note: Battery operation not supportedNote Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

Notera Register your purchase at shop.warwick.de/en/warranty-registration for an extended warranty of 4 years.
  • Tillgänglig sedan Februari 2022
  • Artikelnummer 537656
  • försäljningsenhet 1 Styck
  • Type Looper/Switcher
  • LED Display Yes
  • PSU Connector Yes
  • Shape Floor Effects Pedal
  • MIDI Interface No
1 279 kr
Alla priser inklusive moms
i lager
1

5 Kundbetyg

5 / 5

funktioner

hantverkskvalitet

4 Recensioner

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
JG
magic box in my pedalboard
Jake’s Guitar channel 26.01.2023
One of the best pedals ever made. As my pedalboard grow and grow I found myself struggling with some tonesucking pedals like wah and few other TRUEHARWIRED pedals which I tend to love for sound and hate for tonesucking. This genius pedal works like two independent loops where you can place your tone sucking pedals and leave them off and just keep your signal straght from guitar to an amp or non tonesucking pedals.

Also it has built in buffer which I find is good when you placing some other pedals in front of the amp after this effect. When using from Tri Loop straight to an amp I find that it adds a little more brightness than it should so just advice for you, if you are in this case with no more pedals after Tri Loop, I suggest you to not use it unless you want to have really high presence in amp :)

Absolute must have!! and worht every cent :)
funktioner
hantverkskvalitet
3
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
SG
Handy little tool
Severe GAS Syndrome 19.10.2025
I put this looper on my pedal board in order to switch between two effects line. It works well and does what it have to do. The construction is solid and the switches work very well. It offers various switch option and also have selectable buffers on each line; it's also very compact and in case of not too big pedalboard it's something to consider
As ai said in the title it's a useful tool, there's nothing much more to say.
funktioner
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate de
Tyvärr uppstod ett fel. försök igen senare.
MD
Kleine, aber feine Lösung
Major Dr. Tom 28.07.2022
Den One Control Tri Loop nutze ich aktuell erst mal als Zwei-Wege Effekt-Looper auf meinem Effekt-Pedalboard. Die Gesamtkonstruktion ist robust, und die Schalter sind offensichtlich von hoher Qualität. Beim Umschalten hört man keine Knackgeräusche. Helligkeit der Status-LEDs ist praxisgerecht, d.h. auch nicht zu hell, was ja bei manchen Geräten vorkommen kann.
Meine Signalkette: vor dem Looper die Sound-formenden Pedale (Fuzz - Distortion - Overdrive), den Loop 1 für die Modulationseffekte, Loop 2 für die Reverb/Delay-Effekte.
Fazit: jederzeit für den Aufbau eines kompakten Pedalboards zu empfehlen.
funktioner
hantverkskvalitet
6
0
Anmäl recension

Anmäl recension