Till sidans innehåll

Mounting Plate M20

  • Zinc die-cast flange plate with M20 internal thread
  • For use with spacer rods
  • Diameter: 105 mm
  • Height: 25 mm
  • Bolt circle diameter: 80 mm
  • Weight: 0.24 kg
  • Colour: Black
  • Artikelnummer 104910
  • försäljningsenhet 1 Styck
  • Electronic Accessories No
  • Cabinet Accessories Yes
  • Stand a. Flying Stud Accessories Yes
105 kr
Alla priser inklusive moms
i lager
1

348 Kundbetyg

4.9 / 5

hantverkskvalitet

115 Recensioner

B
Fine
Brynte 21.01.2020
I tried these on EV ELX118P without success. It's a bit like playing the lottery, since you never know if the screw holes and so on are gonna fit your specific speaker. Still good to have around I guess. Solid piece of craftmanship.
0
0
Anmäl recension

Anmäl recension

K
Bra platta
Kim-Lee 21.08.2017
Vad ska man säga om en metallplatta? Har haft den i flera år utan problem och den kommer nog att överleva mig.
0
0
Anmäl recension

Anmäl recension

p
Bra ersättningsartifakt
phantaux 04.06.2026
Fungerar som orginalet - mycket bra
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
A
Really good product
Anonym 25.02.2016
I'm a Live Audio engineer and bought these to use with some M20 K&M distance poles. They do a better job than my previous Adam Hall M20 sockets and were a closer fit.

I fitted these to a pair of Alto Black 18 subs, however, they didn't line-up perfectly. I'm not sure if this is due to the Alto's not being a standard fitting or the sockets not being quite right for a universal fitting. They needed slightly bigger holes drilling into the sockets (1mm) in order for the bolts to line up with the threads on the subs. They also could have had a larger diameter in order to spread the load more as they were smaller than the recessed area on the subs.

However, like I say, I'm not sure whether this is a problem with these sockets or with the Alto subs and so it would be unfair to mark them down without knowing for sure.

I may eventually secure them further to the M10 rigging points on the subs for more stability. But all in all... Another good product from K&M!
1
1
Anmäl recension

Anmäl recension