Till sidans innehåll

Floyd Rose Fat Brass Block L 37mm

4.2 av 5 stjärnor från 5 kundbetyg

Brass Sustain Block

  • Compatible with Floyd Rose tremolo systems Original (6- and 7-string), 1000 Series (6-string) and Special (6-string)
  • Improves sustain and resonance especially in the middle range of a Floyd Rose bridge
  • The L-shape adds material and thus mass to the unused space under the tremolo bar
  • Height: 37 mm
  • Distance of the outer drill holes 34 mm (centre-centre)

Note: due to slightly larger dimensions compared to conventional sustain blocks, additional milling may be necessary for free-floating adjustment.

  • Tillgänglig sedan November 2022
  • Artikelnummer 554345
  • försäljningsenhet 1 Styck
  • Type Tremolo Block
  • Colour Brass
392 kr
Alla priser inklusive moms
I lager om 1-2 veckor
1

5 Kundbetyg

4.2 / 5

hantverkskvalitet

5 Recensioner

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
m
Hell of a block!
macshyha 16.11.2024
Not many reviews probably because... well... it's just a tremolo block. Hell of a lot of a tremolo block.
Great stuff if your guitar doesn't have an extensive cavity and you want to block the tremolo from moving up. A bit more spring tension and drop only tremolo, here it goes.
Therefore it's a great pairing for devices like D-tuna with Floyd Rose equipped guitars.
hantverkskvalitet
0
1
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
F
Great upgrade!
Frostmeister 10.02.2024
Great improvement in sustain, and the duration of the flutter effect.
It fitted the Floyd Rose 1000 in my Harley Benton Fusion II with no issues.
Important: depending on the routing of the back side of your floyd rose cavity, it may limit dive travel.
To tackle that, I expanded the route in mine, to allow full dive travel (10 min. mod with a wood file).
Highly recommended!
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate de
Tyvärr uppstod ett fel. försök igen senare.
A6
War leider nichts
Alex.G 69 03.11.2024
Leider passt dieser Block nicht auf alle Gitarrenmodelle, insbesondere nicht auf meine Charvel USA mit einem aufgeschraubten (non-recessed) Floyd Rose. Durch die Höhe des Blocks lässt sich das Tremolosystem nicht mehr nach unten bewegen, was die Funktion stark einschränkt. Ein großartiges Teil, aber nur für bestimmte Setups geeignet – daher unbedingt die Kompatibilität vorher prüfen.
hantverkskvalitet
0
1
Anmäl recension

Anmäl recension

google translate de
Tyvärr uppstod ett fel. försök igen senare.
E
Wer mehr Sustain will, bekommt mehr Sustain!
Edbugar 11.04.2025
Cooles Teil, mit ordentlich Mehrgewicht im Vergleich zum bei meiner Git (ESP LTD M-1 Custom ´87 DMBL) eingebautem Standard-Block.
Wer's benötigt findet online etliche Anleitung, wie das Teil getauscht wird.
Klare Kaufempfehlung!
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension