Till sidans innehÄll

DMX USB Interface

  • 512 DMX channels (1 universe) either as input or output
  • Fully compliant with USITT DMX512-A
  • Output refresh rate configurable from 1 to 40 FPS
  • Configurable MAB and break time with ENTTEC's EMU software to support non-standard fixtures
  • Supports Windows, MacOS & Linux
  • 1500V full isolation (data and power lines to protect your computer from surges)
  • RDM capable (ANSI E1. 20 compliant)
  • Drivers for Windows, MacOS and Linux (drivers are published and maintained by FTDI)
  • Compatible with various open-source and professional lighting control programs
  • Developer API available for integration into your own software
  • Connectors: 1x 5-pin XLR female DMX output, 1x 5-pin XLR male DMX input
  • IP protection: IP20
  • Maximum output channels: 512
  • Max. output frame rate: 40 Fps
  • Input voltage: 5V DC (via USB)
  • Input power: 300 mA
  • Power consumption: 1.5 W
  • Dimensions: 80x 58 x 40 mm
  • Weight: 80 g
  • TillgĂ€nglig sedan April 2010
  • Artikelnummer 245896
  • försĂ€ljningsenhet 1 Styck
  • Type USB-Interface
  • Type of construction Desktop
  • Connection for PC/Ethernet USB
  • Universes (Outputs) 1
  • DMX-Output 5-pole XLR female
  • DMX-Input 5-pole XLR male
  • RDM-capable Yes
  • Internal memory No
B-Stock frÄn 1 599 kr tillgÀnglig
1 699 kr
Alla priser inklusive moms
i lager
1

385 Kundbetyg

4.7 / 5

funktioner

hantverkskvalitet

198 Recensioner

St
Bra vÀrde för pengarna
S&L tech 07.04.2024
Har bara anvÀnt interfacet nÄgra gÄnger sÄ kan inte bedöma hur slittÄlig burken Àr men den funkar som jag förvÀntade mig! För en billig peng kan jag egentligen inte klaga pÄ att builden kÀnns lite billig (Àven om det Àr det som tog ner den en stjÀrna frÄn full pott). Grym ingÄng till att programmera ljus och portabelt alternativ för frilansaren, sÀrskilt i kitet med tvÄ pro snake DMX Adapters.
funktioner
hantverkskvalitet
0
0
AnmÀl recension

AnmÀl recension

A
Stabil
ABM-Anders 12.04.2018
KÀnns som ett stabilt bygge. Har kört bÄde pÄ win och macOS utan nÄgra problem. Bra funktioner för en billig peng.
funktioner
hantverkskvalitet
1
0
AnmÀl recension

AnmÀl recension

google translate gb
TyvÀrr uppstod ett fel. försök igen senare.
J
The best investment we've ever made
JustSomeTheatre 23.10.2019
Background of me - no technical knowledge, and I hired a technician who was learning on the job with me

Outcome - pure bliss! - this product has given us so much flexibility when touring to all our different theatre venues. We hook it up with QLab 4 (which it is compatible with - others are not) and it has been great! Not had a single issue yet - A great investment that we can use time and time again for a load of venues and we don't need to take with us a board anymore we just plug it into our MacBook and away we go. Really user-friendly as it doesn't overcomplicate what it needs to do! I believe it covers up to one universe so if you need more get the MK2 possibly but for us this did everything we needed.
funktioner
hantverkskvalitet
0
0
AnmÀl recension

AnmÀl recension

google translate gb
TyvÀrr uppstod ett fel. försök igen senare.
T
Better than expected
Tannahill 16.01.2024
I use QLC plus for lighting control on a basic desktop machine with minimal Ubuntu installed. I had problems with flickering lights with Enttec open interfaces and decided to upgrade to this. It solved my problems, and contrary to the instructions no additional drivers had to be installed in the Ubuntu machine. I also ran it without problem on a Mac with an M1 processor.

The only issues I had were with the manufacturers instructions. To check or update the firmware and, if necessary reset it, you need additional software, which it turns out has to be EMU light control software. There is a free version of this, but finding it is not straightforward. The manufacturer does have good support, though, and did provide a link to me. You may wish to get over this hurdle before it arrives.
funktioner
hantverkskvalitet
1
0
AnmÀl recension

AnmÀl recension