I'm using the amp for a home cinema.
a combination of subs and bass shakers. 4x15" on one channel(subs) and 2x12"(bass shakers) on other channel. i've got it to deliver quite linear down to 7hz which shakes the whole house!
using an measurement microphone(not included) at listening position and REW to fine tune the peq to avoid some room nodes and low end drop of of the closed subs.
It sounds great with a lot of punch!
Pros
Build in DSP with a lot of features, x-over, peq, limiter(watt), dynamic eq, delay, user presets and so on. individual per channel or combined.
Alot of power!
Lightweight
volume knobs on the front with distinct steps.
you get a sticker..
USB connection for pc software for tuning. most stuff can be done via front panel too but more via pc software.
lots of bang for the buck
great control of speakers
Cons
peq don't go under 20hz (you can still boost under 20hz with some clever use of the x-over and a first order filter)
LOUD fan, no speed control. but can quite easily be changed to something quiter if you need to be in the same room. warranty is probably voided by this thou..
no power remote input.
I would recommend it to anyone.
