Till sidans innehåll

Pop Filter

  • Washable filter made of stainless steel
  • With hexagonal "Hextech" filter holes
  • Matte black rubberized gooseneck with mounting bracket
  • Printed Aston Microphones logo
  • Tillgänglig sedan Maj 2018
  • Artikelnummer 431405
  • försäljningsenhet 1 Styck
  • Component type Popkiller
539 kr
Alla priser inklusive moms
i lager
1

93 Kundbetyg

4.6 / 5

hantverkskvalitet

55 Recensioner

f
Does it's job
foxifox 08.06.2020
The product it self is of nice quality, and is easy to clean, which is very nice.

The flex-arm thingy stays where it should and hold up great.

Had some issues with dents in the screen on arrival, but support was very good in the end.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

M
Aston shield
Muhamedali 01.01.2026
Robust kvalité utan att tänka på om "tygg" kan gå i sönder. Håller mycket långt och ser snyggt ut.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
J
Aesthetically Pleasing & Highly Functional
JChong 20.11.2020
Needed to swap out my old K&M pop filter which had the meshing tearing. I'd figured I could change out the mesh with some stocking from the dollar store but hey, it's a good opportunity to get a sturdier and nicer looking one.

Looked around for alternatives and I've always been impressed with Aston's pop filters; they look slick and are high functional. Took the dive and ordered this along with my Brauner microphone in the same order. When it came I was surprised how sturdy the gooseneck is. The only drawback was that it's really really really STIFF. A good thing though. Also I'm not a huge fan of the clamp, I would have preferred the ones with a screw which you can tighten onto the microphone stand but the clamp seems tough enough. Only time will tell if the spring loosens up or gives way. Also if the rubber bushings give way it's not going to hold anymore unless you replace it.

Tried it out, excellent pop rejection. It's almost near zero before and after and I don't notice much of a difference in the top end. Some pop filters sort of deaden the top end with too thick of a mesh, other's have very poor plosive rejection (*cough* like the K&M *cough*) but this impressed me.

If any I would have considered the shockmount with the pop filter but the Brauner mics come with their own really nice proprietary shockmount so that might be a purchase few years down the road.
hantverkskvalitet
1
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
s
Seems well made
steadyokay 01.10.2020
Sound is unique, sometimes though if your set-up isn't very good you'll notice a metallic sound to your voice. Keep in mind, this happens with basically every bad set-up though, so not necessarily the shield.

I have moved it a lot and unfortunately it's pretty loose now, as every other kinda cheap pop filter. I place it in front of the mic and as soon as I let go, it tilts further down.

There's a slight chance that due to its design I can screw it in harder or something, but it seems to be the snake is just broken.

I'd still recommend as I think it's mostly my fault and the constant moving from one studio to the other that broke it somewhat.
hantverkskvalitet
1
1
Anmäl recension

Anmäl recension