t
Do the job but very expensive
It's a nut with a nyloc insert in silver. 5.5mm outside dims.
Very expensive from Thomann for some reason - very much cheaper from Screwfix in the UK, however they don't do the corresponding M3 countersunk machine screws.
Ideal for mounting XLRs in a rack panel. It's tricky to get the nut spinner on when doing this, but that's the fault of the panel and the connector rather than this nut.
Can't really fault these other than they are not black like the machine screws or the panel, but this is not an issue if they are to the back of the assembly.
Very expensive from Thomann for some reason - very much cheaper from Screwfix in the UK, however they don't do the corresponding M3 countersunk machine screws.
Ideal for mounting XLRs in a rack panel. It's tricky to get the nut spinner on when doing this, but that's the fault of the panel and the connector rather than this nut.
Can't really fault these other than they are not black like the machine screws or the panel, but this is not an issue if they are to the back of the assembly.
2
1
Anmäl recension
n
Works great
It's a bit annoying that these aren't sold with the corresponding screws, but if you are building a custom D-Type rack patchbay, these things work great.
0
0
Anmäl recension
P
Beautiful nuts
I purchased these nuts to secure some Neutrik sockets onto my tie line boxes. The nuts fit perfectly and people have walked into my studio and commented on my beautiful nuts. What strong, shiny nuts you have - they will say. You should see how tight they are too and I don't want anyone to get their hands on my nuts, they are my nuts and don't touch them.
0
0
Anmäl recension