Meris Ottobit X Pink LTD

Effect Pedal

• Stereo Lo-Fi, Advanced Bit Crusher, Glitch and Modulation effects pedal
• Limited edition in ‘Multidimensional Pink’
• A comprehensive, modular stereo engine for degradation effects and textures with that vintage 80s sound
• 6 glitch types: Grain Freeze (granular freezing of audio material), Stutter (rhythmic repetitions), 2 loopers (1-button function), Push Loop and ‘Wikki Wikki’ (vinyl scratching), Tape Stop (tape stop effect with variable speed) and Stutter Step (sequenced glitch effect)
• 3 types of filter: ladder, state-variable and Otto Tron
• 2 types of ambience (spatial sound): VHS reverb and VHS delay
• 5 pitch types: Polychroma, Otto Tune, Micro Tune, Monochroma, Lo-Fi
• 5 modulation types: ring modulation, Div-Tremolo, tape modulation, frequency shifting and Otto Vibe
• 4 preamp types: Volume Pedal, Tube, Vinyl and Wavefold
• Intuitive user interface with a dimmable colour display
• Hold modifier switch for control during operation
• 99 preset slots across 33 banks, each containing 18 artist presets
• Switchable headroom for instrument or synthesiser / line levels
• Configurable expression pedal control for multiple parameters simultaneously
• MIDI input and output: via standard MIDI DIN sockets or USB-C
• MIDI implementation for continuous parameter control
• Sending and Receiving MIDI Presets
• MIDI Beat Clock synchronisation
• High-quality analogue signal path and 24-bit AD/DA converters with a 32-bit floating-point DSP
• High-quality JFET input section from Analog Devices
• Digitally controlled analogue mix bus
• 48 kHz sample rate
• SNR (signal-to-noise ratio): 115 dB (typical)
• Frequency range: 20 to 20,000 Hz
• Max. input level: +9 dBu (instrument level setting) or +12.5 dBu (line/synth level setting)
• Selectable bypass (True/Relay bypass or Buffered bypass)
• Control for sample rates from 48 Hz to 48 kHz
• 'Bits' slider for bit depth from 1 to 24 bits
• Level control for output level
• Filter control for the filter’s cut-off frequency
• 3 controls for navigation
• 4 footswitches for selecting presets, bank up/down, tuner and bypass
• Status LEDs
• Metal housing
• Inputs: 2 x 6.3 mm mono jacks (L / R)
• Outputs: 2 x 6.3 mm mono jacks (L / R)
• Expression pedal input: 6.3 mm TRS
• MIDI input and output
• USB-C port for connecting to a computer for firmware updates
• Line / Synth-Level LED indicator
• Power supply via a 9 V DC mains adaptor (not included; polarity: (-) inside
• Current consumption: 300 mA
• Dimensions (L x W x H): 114.3 x 184.2 x 50.8 mm
• Weight: 680 g
• Made in USA

Note: Battery operation is not supported