Till sidans innehåll

Harley Benton Parts ABR Bridge Gold

4.8 av 5 stjärnor från 38 kundbetyg

Vintage Style Original ABR-1 Single Cut type Bridge

  • Gold
  • 52 mm String spacing
  • Included: Mounting sleeves
  • Tillgänglig sedan December 2012
  • Artikelnummer 284189
  • försäljningsenhet 1 Styck
  • Colour Gold
  • Design ABR
  • Single Rider Yes
  • Tailpiece No
260 kr
Alla priser inklusive moms
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
1

38 Kundbetyg

4.8 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

hantverkskvalitet

25 Recensioner

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
N
Good stuff
NevermindMe 13.02.2025
The original gold bridge on the HB35 Plus is about 14mm thick, which caused two strings to touch it on the back side. As a result, I had to raise the tailpiece and the studs on the tailpiece became angled from tension. This bridge is about 2mm thinner and the strings are not touching it, even with the tailpiece down to the deck. So, the trigonometry and stabilty of both parts has improved. I didn't even have to change the screws for the bridge, the bridge fits tightly. Did I mention the colour is matching? I also bought a tailpiece as a spare because I considered overwrapping, but now I don't need to.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
M
Great Deal!
Mr.Gandalf 27.10.2020
I bought this bridge to replace the only one on my Harley Benton Dc 600 IV. There is not much to say other that this is a great replacement and is far superior to the stock one. I reckon it will fit SC models too. Total deal!
hantverkskvalitet
1
1
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
M
DIY project
Matt29 11.08.2025
I bought this because I was making a guitar and I needed parts that would suit the colour of the hardware and the rest of the guitar, works perfect had no problems would recommend
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
S
good build quality
StefB 09.02.2021
I've put this on a HB Les Paul, together with a Duesenberg tremelo system. Very happy with the quality overall.
hantverkskvalitet
1
1
Anmäl recension

Anmäl recension