Till sidans innehåll

Fender Standard-Highway One B. Tuners

4.7 av 5 stjärnor från 6 kundbetyg

Machine Head Set For Electric Bass

  • Suitable for models from the Highway One, American Special, American Deluxe, Blacktop and Standard series
  • Configuration: 4 left
  • Open construction
  • Vintage style
  • Usable shaft length: 17.5 mm
  • Total shaft length: 30 mm
  • Shaft diameter: 14 mm
  • Bore: 18.5 mm
  • Colour: Chrome
  • Incl. fixing screws and impact sleeves
  • Tillgänglig sedan Oktober 2021
  • Artikelnummer 526517
  • försäljningsenhet 1 Styck
  • Colour Chrome
1 129 kr
Alla priser inklusive moms
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
1

6 Kundbetyg

4.7 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

hantverkskvalitet

6 Recensioner

k
knivfest 12.02.2025
There are for sure better tuners out there but these are actually pretty decent. Screw holes fit perfect on my neck. Had to ream out the holes for the ferrules a little bit but that's not a big deal.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
E
Perfect Fit And Work Great
Enda-O 28.03.2024
I bought these as a direct replacement for the very well used machine heads on my '99 Fender mexico Jazz bass.
These fit perfectly and all screw holes line up exactly (unlike a generic set i previously bought in a local store but was thankfully able to return because none of the screw holes lined up and the bushing were too small).
I was very impressed that this set includes two full sets of bushings - the chrome rings that press-fit into the headstock to centre the tuning machines.
One set is approx. 17mm and the other is approx. 18.5mm.
I went with the larger size, which were about 0.5mm wider than the original bushings I removed, and these fit really securely and tightly into the headstock.
Fender obviously put a bit of thought into their aftermarket parts, even the 16 small screws included are very slightly wider than the stock ones I removed and these also fit very securely.
There are a few different types of Fender machine heads for bass but having spent a fair bit of time researching I would advise checking the shape of the plate on the back of the headstock and if it is an "elongated D-shape" with an arc on one side (as opposed to square/parallel edges) then these are the correct replacement and will fit perfectly.
These should fit Mexican standard, Player Series and Highway One series but do your research just to be sure.
The quality and operation are exactly like the originals and they hold tune really well.
Overall I'm extremely happy with this purchase and the excellent and prompt service from Thomann and hopefully this review might help someone else.
hantverkskvalitet
2
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
K
Proper tuners
KennyVL 21.04.2025
They're decent tuners. Installed them on mexican fretless jazz neck with not too much effort, just had to hammer in the rings and screw in the tuners in the pre-drilled holes. 4 stars because they are overpriced in my opinion.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate fr
Tyvärr uppstod ett fel. försök igen senare.
RS
Roulez des mécaniques
Ryo Sakazaki 22.01.2022
Bon poids, belles finitions, précises et qui tiennent bien l'accord, en tous cas avec un tirant 45-105 en accordage standard.

Info importante: conviennent parfaitement pour le manche Fender Neck P-Bass Medium Jumbo MN (acheté précédemment et vendu ici également), les trous pré-percés à l'arrière de la tête afin de fixer les mécaniques tombent pile poil avec ceux des mécaniques. Très appréciable aussi: 2 lots d'anneaux bushings de taille différentes sont fournis également. Par contre c'est dommage car un lot de bushings est un rien trop grand pour entrer (même délicatement avec un petit maillet), ce qui impose un limage/agrandissement des 4 trous. Et le second lot est lui un rien trop petit (ils flottent dans les trous et il faudra donc les revêtir de ruban teflon afin de récupérer l'espace en trop.. J'ai opté pour la seconde solution dans un premier temps ne disposant pas de l'outil adéquat pour agrandir les trous). Un des deux lots tombera peut être nickel pour votre manche, je parle toujours concernant le Fender Neck P-Bass Medium Jumbo MN vendu seul. Mais les mécaniques en elles mêmes sont très bien et semblent être un bon rapport qualité prix. Livraison rapide et Thomann toujours au top.
hantverkskvalitet
2
0
Anmäl recension

Anmäl recension